Spectrum M1 specification.
Material - Surgical Stainless Steel - Grade 304 LF (manufactured in Japan)
Parts of contact - brass with silver coating
Parts of insulation - plastic
Diameter - 23mm
Height - 85mm using 16340, 18350,100mm using 18490, 18500,115mm using 18650
1. Squeeze Control - it has two types of air control methods: Air-controlling with o-ring squeezing and Air-controlling with air control metal ring.
2. Adjusting air control with any kinds of atomizers with bottom air holes - even 510 atomizers without the bottom hole can be used with Squeeze Control.
3. When direct-dripping, the chamber below the atomizer can hold 10~12 drops of e-liquids.
4. Leaked e-liquid through the bottom hole is collected in the chamber,
and then it is being drawn into the atomizer through Liquids Reloads System. Within the size of the chamber-holding(10~12 drops), it never leaks out of the atomizer.
5. Free Positioning Switch - you can assemble the switch either the upper part or the lower part. Even you can put it in the middle position when using 2 batteries for high voltage setting.
6. While using the telescopic tube, the bottom tube could be a little bit rattling. If not wanting that, you could switch the upper and lower part and make it fixed using 1 x 18650 or 2 x 18350s.
7. Extra o-rings can be held in the bottom cap. - these o-rings can be used to make a more complete sealing to put one of these o-ring onto the top cap using some sorts of attys like DC Tank.
Or, these o-rings can be placed between the battery tube and the atty to adjust the height of the + contact to prevent a scratch or a touch.
8. Fits all sized batteries - 18350, 18490/18500, 18650 even with Evolv Kick except 18650.
At this order, the extended tube for 18650+Kick isn’t included. It’ll be included from the next order.
9. Optimized PV for direct-dripping and Expandable with M series.
10. Lockable Switch
11. Zen-Atty-G and UFS can be fitted directly onto the top tube without any adapter.
12. Having a plan to make PV with completely different styles and functions just adding some new parts to M1. You could expect that.
You can choose one of the 3 color options.
Unlike I planned to make them mirror-polished, but there are no factory to do such a small quantity, so take this into consideration, please.
A. Chrome - surgical grade coating, not industrial. It’s 4 times more expensive than industrial one.
B. Titan Black - titanium coating. It’s highly resistant to scratches.
C. Light Bronze - titanium coating. It’s highly resistant to scratches.
Personally I recommend Chrome color.This color is very nice match with another attys.
[You must be registered and logged in to see this image.]
Пред запись тут [You must be registered and logged in to see this link.]
Цена почтой Южной Кореи 240$
EMS 255$
Material - Surgical Stainless Steel - Grade 304 LF (manufactured in Japan)
Parts of contact - brass with silver coating
Parts of insulation - plastic
Diameter - 23mm
Height - 85mm using 16340, 18350,100mm using 18490, 18500,115mm using 18650
1. Squeeze Control - it has two types of air control methods: Air-controlling with o-ring squeezing and Air-controlling with air control metal ring.
2. Adjusting air control with any kinds of atomizers with bottom air holes - even 510 atomizers without the bottom hole can be used with Squeeze Control.
3. When direct-dripping, the chamber below the atomizer can hold 10~12 drops of e-liquids.
4. Leaked e-liquid through the bottom hole is collected in the chamber,
and then it is being drawn into the atomizer through Liquids Reloads System. Within the size of the chamber-holding(10~12 drops), it never leaks out of the atomizer.
5. Free Positioning Switch - you can assemble the switch either the upper part or the lower part. Even you can put it in the middle position when using 2 batteries for high voltage setting.
6. While using the telescopic tube, the bottom tube could be a little bit rattling. If not wanting that, you could switch the upper and lower part and make it fixed using 1 x 18650 or 2 x 18350s.
7. Extra o-rings can be held in the bottom cap. - these o-rings can be used to make a more complete sealing to put one of these o-ring onto the top cap using some sorts of attys like DC Tank.
Or, these o-rings can be placed between the battery tube and the atty to adjust the height of the + contact to prevent a scratch or a touch.
8. Fits all sized batteries - 18350, 18490/18500, 18650 even with Evolv Kick except 18650.
At this order, the extended tube for 18650+Kick isn’t included. It’ll be included from the next order.
9. Optimized PV for direct-dripping and Expandable with M series.
10. Lockable Switch
11. Zen-Atty-G and UFS can be fitted directly onto the top tube without any adapter.
12. Having a plan to make PV with completely different styles and functions just adding some new parts to M1. You could expect that.
You can choose one of the 3 color options.
Unlike I planned to make them mirror-polished, but there are no factory to do such a small quantity, so take this into consideration, please.
A. Chrome - surgical grade coating, not industrial. It’s 4 times more expensive than industrial one.
B. Titan Black - titanium coating. It’s highly resistant to scratches.
C. Light Bronze - titanium coating. It’s highly resistant to scratches.
Personally I recommend Chrome color.This color is very nice match with another attys.
[You must be registered and logged in to see this image.]
Пред запись тут [You must be registered and logged in to see this link.]
Цена почтой Южной Кореи 240$
EMS 255$
Mon 18 Sep - 10:57 by alex guo
» https://www.nicflavors.com/
Mon 18 Sep - 10:44 by alex guo
» Представляем к вниманию две модели, чем же особенно интересен вапорайзер?
Thu 29 Jun - 12:37 by goodmood
» Где купить хорошую табачную арому
Sun 26 Feb - 8:39 by asas1969
» Где заказать житскость или основу за границей
Fri 27 Jan - 11:49 by asas1969
» Купить вапик крутой цены супер goodmood_vaporizers Инста
Thu 19 Jan - 0:49 by goodmood
» fasttech
Mon 9 Jan - 12:31 by shlom
» Freemax Galex Pod с FM-утечками
Fri 9 Dec - 5:39 by freemax
» Куплю никотин 100
Sun 9 Oct - 15:34 by tigruha
» Нагревание табака вместо курения сигарет: риски и преимущества. Слово за наукой
Mon 24 Jan - 16:13 by Admin V